Please follow the steps to manually configure the XMUNET + wireless network for better security. Before using XMUNET + wireless network, make sure your computer's date, time and time zone are correct, and the system to be installed to the latest update.
1、Enter the [Control Panel] -> [Network and Sharing Center], and follow the red arrows to complete the operation.
IF you want to reset or delete the XMUNET+ setting, please see the step 5.
Input SSID：XMUNET+，Select the security type and encryption type shown in the illustration.
2、After the completion of the addition, do not connect. Continue to complete the following connection settings.
3、In the security properties of XMUNET +, set the EAP attribute, select PEAP.
In the security properties of XMUNET +, complete the advanced settings
4、Complete all settings, click on the link XMUNET +, manually enter the user name, password for authentication.
5、IF you want to reset or delete the XMUNET+ setting, you can do:
地址：思明校区嘉庚三12楼1202
电话：0592-2183508
邮箱：service@xmu.edu.cn
